Contact us
Phone: +86-18631995308
WhatsApp:8618631995308
Email:sales@zlrubber.com
Liyuantun Town, Weixian County, Xingtai City, Hebei Province, China
U/H-Type Fixing Components
Share to
- 产品描述
-
Product Introduction
A product specifically designed for reinforcing pipes wrapped in 20mm thick corner boards or walls with a thickness of 50mm or more on the side, as well as for connecting boards of the same thickness.
Product Specifications
H-shaped fastener: width 50mm/80mm/100mm
U-shaped fastener: width 20mm/50mm/80mm/100mmInstructions For Use
Instructions for using U-shaped fasteners
Step 1: Position and lay out the lines at the location where the independent partition wall needs to be made. Use screws or expansion screws to install and fix U-shaped fasteners. Suggested spacing: 80cm/wall and 60cm/floor. Clean and apply P8 adhesive
Step 2: Apply P8 glue or putty to other areas, embed the board into the U-shaped fixture, use a level to check if the board is horizontal and vertical, and use a right angle scraper to smooth out any P8 glue or putty that overflows at the junction of the wall and floor.
Instructions for using H-shaped fasteners
Step 1: Apply P8 glue to the side of the first board, install H-shaped fasteners (recommended spacing of 80cm per piece) - Apply P8 glue to the H-shaped fasteners, install the second board, and apply P8 glue to the side of the board before installation;
Step 2: Use a self-adhesive mesh cloth with a width of 8cm or more to stick it to the gap between two boards. Apply adhesive paste to the self-adhesive mesh and scrape it flat. Finally, install the decorative layer.
TAGS:
Related Products
